The UMG 96S is a measuring gadget or device which is appropriate for evaluating, recording and monitoring the electrical parameters (True-RMS) in little and average voltage networks. The measurement is appropriate for 1 and 3 phase systems with an unbiased conductor in less and medium voltage networks. The main feature of the measurement instrument is the dense and compressed construction (96 x 96 mm) and the evaluation of harmonic currents and voltages in each outside conductor. In order to attain the functional assortment of the universal measurement instrument, you would require around 15 analogue units such as an ampere meter, volt meter, volt meter switch, power meter (kW, kVA, kvar, cos ), an efficient and immediate energy meter (kWh / kvarh), a harmonic analyzer and a measurement converter. This means that the planning, installation, wiring and storage expenditures are considerably minimized for the UMG 96S in contrast to the analogue measuring devices.
It is likely to save up to 160.000 measured values or incidents in the data memory (optional). For saving the calculated values and events, 4 pre defined profiles are at your disposal. Each profile can be planned individually or together with other profiles
The digital outputs can be utilized as pulse outputs (maximum of 10 Hz) for the efficient and immediate energy consumption or as switch outputs. The digital outputs can be planned in order to supervise the measurement data. Up to 3 comparators (A, B, C) can be given to each digital output and the outcome is accomplished and carried out to the digital output. The comparator outcome can also be written from outside all the way through the RTU Modbus. The switch outputs can also be laid down through the Profibus remote.